STD. RIGHT HAND SHOWN

Ross E Williams Firearms Co. Claw Extractors for Winchester M70

THESE CAN EASILY BE REMOVED BY THE OWNER. HOLD THE REAR OF THE BOLT BODY WITH THE LOCKING LUGS FORWARD AND ROTATE THE EXTRACTOR CLOCKWISE, THEN PUSH  FORWARD TO RELEASE IT FROM THE EXTRACTOR COLLAR.

THIS CAN BE AIDED WITH THIN BLADED SCREW DRIVER TO HELP RAMP OUT OF BOLT GROOVE.

INSTALL THE EXTRACTOR IN REVERSE ORDER. A PADDED VISE OR LOCKING PLIERS MAY BE NEEDED TO COMPRESS THE EXTRACTOR COLLAR TO ALLOW EXTRACTOR TO ENGAGE.

FITS LONG, SHORT, SUPER SHORT AND PRE64 MODEL 70

OUR EXTRACTORS ARE MACHINED FROM SOLID 416 STAINLESS BAR STOCK. THEY ARE THEN DEBURRED AND HEAT TREATED TO 37-41 RC HARDNESS. SPRING TENSION IS THEN ADJUSTED TO FACTORY SPECIFICATION.BEAD BLASTED MATTE FINISH.

PRICE       $63.00

STANDARD RIGHT HAND

SHOWN